unconfigure vpex

unconfigure vpex ports port_list slot

Description

Allows you to disassociate a bridge port extender (BPE) from a slot number assignment.

Syntax Description


vpex	Specifies Virtual Port Extender (VPEX).
ports	Specifies switch ports attached to BPEs.
`port_list`	Specifies switch ports attached to BPEs. Must be in the format `slot`:`port`. Note: If the switch port is a LAG, the port specified must be the master port.
slot	Specifies the BPE slot assignment.

Default

N/A.

Usage Guidelines

The behavior of this command is similar to removing slots within a chassis. After executing this command, the BPE no longer occupies the slot number assignment.

Example

The following example removes the slot number assignment from a BPE attached to switch port 1:23:

# unconfigure vpex ports 1:23 slot

History

This command was first available in ExtremeXOS 22.5.

Platform Availability

This command is available on ExtremeSwitching 5420 and 5520 series switches, and Extreme 7520-48Y switches.